Gunsmithing by Utah Red
435.386.1428

All Work Guaranteed

---




Single Action Work:


• Serrate Front Sight for No Glare $15
• Chamfer & Deburr Cylinder $15
• Polish Chambers for E-Z Extraction $25
• Lighten Trigger Pull (Does not include $20 parts $35
• Shorten Base Pin (Ruger) for Complete Ejection $10
• Complete Action Tune:
• Stone, Deburr and Polish Entire Action, and Match Both Triggers - S-M-O-O-T-H
  • Rugers - Plus parts ($20) $100
  • EMF - Hartford All Colt Clones (Includes parts) $110
  • Colts (P Frame) SAA (Includes parts) $105

• Adjust Point of Impact (does not include ammo) $25
• Widen Rear Sight - Vaquero (Much Faster) $15
• Ruger 44-40's Repair Factory undersize Cylinders
  from .423 to Proper .429 also Polish and Chamfer $60
• Install Steel Ejector Housing (includes Bluing) Ruger $40
• Ruger Vaquero match BBL. installed including Sights $150
• Blackhawk Match BBL. installed less Bluing $150
• Re-cut forcing cone to 18 degrees $20

• Marlin Action Job - Lighten Trigger Pull, Faster Lock Time,
• Improved Ejection, Deburr Loading Gate, Smooth parts.
• A HUGE Difference over Stock, Much, Much, Faster $90
• EMF 1873, 1866, Henrys $90

• Rossi 92 Same as Above. Done Properly! $90
• Replace Factory Rear Sight with a New Marble's Sight $20
• Winchester 94 - Positive Feeding, Set Headspace etc... $75

Colonial Choke Tube installed & New Front Sight $60

Winchester '97 Repair Work

• Smooth the Action. Check BOTH Extractors, Set Timing,
• Open Mag Tube. Polish the Pitting from Chamber & Forcing Cone, Re-cut sears... etc. ...(Quote)

NEW! The Ruger Top Gun Conversion!!

• Ultimate Ruger Conversion (for Competition Only)
• Must be Hand Fitted
• Internal Parts Modified.
• Must be Felt to be Believed. $260 or $500 per Pair.